68/100
- 838 × 838 mm
- No spindle
Onefinity CNC Routers: Models, Specs & Where They Fit
Canadian maker of ball-screw-driven desktop CNC routers sold direct. Publishes a full comparison table across the range, though only a per-series starting price rather than a figure per size.
They build machines but do not sell the consumables for them, so bits, collets and dust hardware come from third parties. That is normal and generally cheaper, but it does mean fitment is on you to check rather than guaranteed by the box.
What they make
The machines we track sit at similar prices, so this is not a ladder you climb. Read them as alternatives rather than tiers, and let the envelope and drive type decide.
In practical terms the line runs from 419 × 419 mm up to 1245 × 1248 mm. That bottom end is a machine for signs, inlays and learning; the top end starts to make useful pieces of a full sheet viable. If your work sits over about 400mm in either axis, most of this range is ruled out before any other specification matters.
How much of the spec sheet they publish
Onefinity publishes noticeably less than our scoring model asks for - on average only 61% of the weight can be applied. Practically, that means a score on this page is a summary of the parts they were willing to document, and the rest is an unknown you would be inheriting. This is the single most useful thing to understand before comparing these numbers against a better-documented brand: a lower score on complete data often describes a safer purchase than a higher one built on two-thirds of the picture.
Coverage is the share of our scoring model a machine's published figures can actually fill - the weights are listed on the methodology page.
Machines we track
57/100
- 419 × 419 mm
- No spindle
53/100
- 1,245 × 1,248 mm
- No spindle
53/100
- 1,245 × 838 mm
- No spindle
Buying direct or on a marketplace
Onefinity sells direct rather than through the marketplaces we track, so there is no live price on this page for their products. That is a deliberate choice by the manufacturer and often a good one for the buyer - direct sales usually mean better support and firmware continuity - but it does mean you should check their own store for current pricing.
Onefinity - common questions
- Are Onefinity CNC routers any good?
- Their machines score between 53 and 68 on our model, but the more useful figure is coverage: only about 61% of the scoring weight can be applied because parts of the specification are unpublished. Read those scores as a summary of what is documented, not of the whole machine.
- Which Onefinity machine should I buy?
- It depends far more on your envelope than on the score. Work out the largest piece you realistically need to cut and the thickest stock you need to clear, then rule out everything that cannot take both - that usually leaves one or two candidates, and the drive type decides between them.
Sources
Specifications are transcribed from each manufacturer's own published product pages, recorded per machine with the URL and the date verified. Prices are dated observations refreshed daily from retailer APIs, not live quotes. Marketplace listing copy, forums and news aggregators are research inputs and are never used as sources of record. Manufacturer site: www.onefinitycnc.com.